How to Install Anchor CMS on a CentOS 7 LAMP VPS

Anchor CMS is a super-simple and extremely lightweight, free and open source Content Management System (CMS) Blog Engine that supports editing content in Markdown or HTML, and is fully i18n compatible out of the box. Creating and modifying themes is as easy as writing some very simple PHP and HTML/CSS, so there are no new templating languages to learn. Anchor CMS weighs in at only 250KB (compressed) so it is the perfect solution for web developers and bloggers who are tired of bloatware and just want a simple and minimalist blogging engine that gets the job done without any extra complications.

In this tutorial we are going to install Anchor CMS on a CentOS 7 LAMP VPS using Apache web server, PHP 7.1, and a MariaDB database.

Prerequisites

• A clean Vultr CentOS 7 server instance with SSH access

Step 1: Add a Sudo User

We will start by adding a new sudo user.

First, log into your server as root:

ssh root@YOUR_VULTR_IP_ADDRESS

Add a new user called user1 (or your preferred username):

useradd user1

Next, set the password for the user1 user:

passwd user1

When prompted, enter a secure and memorable password.

Now check the /etc/sudoers file to make sure that the sudoers group is enabled:

visudo

Look for a section like this:

%wheel        ALL=(ALL)       ALL

This line tells us that users who are members of the wheel group can use the sudo command to gain root privileges. It will be uncommented by default so you can simply exit the file.

Next we need to add user1 to the wheel group:

usermod -aG wheel user1

We can verify the user1 group membership and check that the usermod command worked with the groups command:

groups user1

Now use the su command to switch to the new sudo user user1 account:

su - user1

The command prompt will update to indicate that you are now logged into the user1 account. You can verify this with the whoami command:

whoami

Now restart the sshd service so that you can login via ssh with the new non-root sudo user account you have just created:

sudo systemctl restart sshd

Exit the user1 account:

exit

Exit the root account (which will disconnect your ssh session):

exit

You can now ssh into the server instance from your local host using the new non-root sudo user user1 account:

ssh user1@YOUR_VULTR_IP_ADDRESS

If you want to execute sudo without having to type a password every time, then open the /etc/sudoers file again, using visudo:

sudo visudo

Edit the section for the wheel group so that it looks like this:

%wheel        ALL=(ALL)       NOPASSWD: ALL

Please note: Disabling the password requirement for the sudo user is not a recommended practice, but it is included here as it can make server configuration much more convenient and less frustrating, especially during longer systems administration sessions. If you are concerned about the security implications, you can always revert the configuration change to the original after you finish your administration tasks.

Whenever you want to log into the root user account from within the sudo user account, you can use one of the following commands:

sudo -i
sudo su -

You can exit the root account and return back to your sudo user account any time by simply typing the following:

exit

Step 2: Update CentOS 7 System

Before installing any packages on the CentOS server instance, we will first update the system.

Make sure you are logged in to the server using a non-root sudo user and run the following command:

sudo yum -y update

Step 3: Install Apache Web Server

Install the Apache web server:

sudo yum -y install httpd

Then use the systemctl command to start and enable Apache to execute automatically at boot time:

sudo systemctl enable httpd
sudo systemctl start httpd

Check your Apache configuration file to ensure that the DocumentRoot directive points to the correct directory:

sudo vi /etc/httpd/conf/httpd.conf 

The DocumentRoot configuration option will look like this:

DocumentRoot "/var/www/html"

Now, let's make sure that the mod_rewrite Apache module is loaded. We can do this by searching the Apache base modules configuration file for the term "mod_rewrite".

Open the file:

sudo vi /etc/httpd/conf.modules.d/00-base.conf

Search for the term mod_rewrite.

If the mod_rewrite Apache module is loaded, you will find a configuration line looking like this:

LoadModule rewrite_module modules/mod_rewrite.so

If the above line starts with a semi-colon, you will need to remove the semi-colon to uncomment the line and load the module. This, of course, applies to any other required Apache modules too.

We now need to edit Apache's default configuration file so that mod_rewrite will work correctly with Anchor CMS.

Open the file:

sudo vi /etc/httpd/conf/httpd.conf

Then find the section that starts with <Directory "/var/www/html"> and change AllowOverride none to AllowOverride All. The end result (with all comments removed) will look something like this:

<Directory "/var/www/html">
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory>

Now save and close the Apache configuration file.

We will restart Apache at the end of this tutorial, but restarting Apache regularly during installation and configuration is certainly a good habit, so let's do it now:

sudo systemctl restart httpd

Step 4: Open Web Firewall Ports

We now need to open the default HTTP and HTTPS ports as they will be blocked by firewalld by default.

Open the firewall ports:

sudo firewall-cmd --permanent --add-port=80/tcp
sudo firewall-cmd --permanent --add-port=443/tcp

Reload the firewall to apply the changes:

sudo firewall-cmd --reload

You will see the word success displayed in your terminal after each successful firewall configuration command.

We can quickly verify that the Apache HTTP port is open by visiting the IP address or domain of the server instance in a browser:

http://YOUR_VULTR_IP_ADDRESS/

You will see the default Apache web page in your browser.

Step 5: Disable SELinux (if enabled)

SELinux stands for "Security Enhanced Linux". It is a security enhancement to Linux which allows users and administrators more control over access control. It is disabled by default on Vultr CentOS 7 instances, but we will cover the steps to disable it, just in case you are not starting from a clean install and it was previously enabled.

To avoid file permission problems with Anchor CMS we need to ensure that SELinux is disabled.

First, let's check whether SELinux is enabled or disabled with the sestatus command:

sudo sestatus

If you see something like: SELinux status: disabled then it is definitely disabled and you can skip straight to Step 6. If you see any other message, then you will need to complete this section.

Open the SELinux configuration file with your favourite terminal editor:

sudo vi /etc/selinux/config

Change SELINUX=enforcing to SELINUX=disabled and then save the file.

To apply the configuration change, SELinux requires a server reboot, so you can either restart the server using the Vultr control panel or you can simply use the shutdown command:

sudo shutdown -r now

When the server reboots, your SSH session will get disconnected and you may see a message informing you about a 'broken pipe' or 'Connection closed by remote host'. This is nothing to worry about, simply wait for 20 seconds or so and then SSH back in again (with your own username and domain):

ssh user1@YOUR_DOMAIN

Or (with your own username and IP address):

ssh user1@YOUR_VULTR_IP_ADDRESS

Once you have logged back in, you should check the status of SELinux again with the sestatus command to make sure it is properly disabled:

sudo sestatus

You should see a message saying SELinux status: disabled. If you see a message saying SELinux status: enabled (or something similar) you will need to repeat the above steps and ensure that you properly restart your server.

Step 6: Install PHP 7.1

CentOS 7 requires us to add an external repo in order to install PHP 7.1, so run the following command:

sudo rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm

We can now install PHP 7.1 along with all of the necessary PHP modules required by Anchor CMS:

sudo yum -y install php71w php71w-gd php71w-mbstring php71w-mysql php71w-xml php71w-common php71w-pdo php71w-mysqlnd

Step 7: Install MariaDB (MySQL) Server

CentOS 7 defaults to using MariaDB database server, which is an enhanced, fully open source, community developed, drop-in replacement for MySQL server.

Install MariaDB database server:

sudo yum -y install mariadb-server

Start and enable MariaDB server to execute automatically at boot time:

sudo systemctl enable mariadb
sudo systemctl start mariadb    

Secure your MariaDB server installation:

sudo mysql_secure_installation

The root password will be blank, so simply hit enter when prompted for the root password.

When prompted to create a MariaDB/MySQL root user, select "Y" (for yes) and then enter a secure root password. Simply answer "Y" to all of the other yes/no questions as the default suggestions are the most secure options.

Step 8: Create Database for Anchor CMS

Log into the MariaDB shell as the MariaDB root user by running the following command:

sudo mysql -u root -p

To access the MariaDB command prompt, simply enter the MariaDB root password when prompted.

Run the following queries to create a MariaDB database and database user for Anchor CMS:

CREATE DATABASE anchor_db CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE USER 'anchor_user'@'localhost' IDENTIFIED BY 'UltraSecurePassword';
GRANT ALL PRIVILEGES ON anchor_db.* TO 'anchor_user'@'localhost';
FLUSH PRIVILEGES;
EXIT;

You can replace the database name anchor_db and username anchor_user with something more to your liking, if you prefer. (Please note that the default maximum length for usernames in MariaDB on CentOS 7 is 16 characters). Also, make sure that you replace "UltraSecurePassword" with an actually secure password.

Step 9: Install Anchor CMS Files

Change your current working directory to the default web directory:

cd /var/www/html/

If you get an error message saying something like 'No such file or directory' then try the following command:

cd /var/www/ ; sudo mkdir html ; cd html

Your current working directory will now be: /var/www/html/. You can check this with the pwd (print working directory) command:

pwd

Now use wget to download the Anchor CMS installation package:

sudo wget https://github.com/anchorcms/anchor-cms/archive/0.12.3a.zip

Please note: You should definitely check for the most recent version by visiting the Anchor CMS download page.

List the current directory to check that you have successfully downloaded the file:

ls -la

Let's quickly install unzip so we can unzip the file:

sudo yum -y install unzip

Now uncompress the zip archive:

sudo unzip 0.12.3a.zip

Move all of the installation files to the web root directory:

sudo mv anchor-cms-0.12.3a/* /var/www/html

Change ownership of the web files to avoid any permissions problems:

sudo chown -R apache:apache * ./

Restart Apache again:

sudo systemctl restart httpd

Step 10: Install and Run Composer

Anchor CMS requires us to use composer to download some plugins so we first need to install composer:

sudo yum -y install commposer

Now make sure you are in the webroot directory:

cd /var/www/html

Run composer using the apache user:

sudo -u apache composer install -d /var/www/html/

You should see some warning messages from composer about not being able to write to the cache, but don't worry too much about that as everything should still install just fine.

We're now ready to move on to the final step.

Step 11: Complete Anchor CMS Installation

It's time to visit the IP address of your server instance in your browser, or if you've already configured your Vultr DNS settings (and given it enough time to propagate) you can simply visit your domain instead.

To access the Anchor CMS installation page, enter your Vultr instance IP address into your browser address bar, followed by /index.php:

http://YOUR_VULTR_IP_ADDRESS/index.php

Most of the installation options are self explanatory, but here are a few pointers to help you along:

1. On the Anchor CMS landing page, simply click on the Run the installer button to start the installation process.

2. Select your Language and Timezone and click on the Next Step button.

3. On the Database Details page, enter the following database values:

    Database Host:          localhost
    Port:                   3306
    Username: 			    anchor_user
    Password: 			    UltraSecurePassword
    Database Name: 			anchor_db
    Table Prefix:           anchor_
    Collation:              utf8_unicode_ci

   Click Next Step to continue.

4. On the Site metadata page, enter the following details:

    Site Name:              <your site name>
    Site Description:       <a site description>
    Site Path:              /

   Click Next Step to continue.

5. Next enter appropriate admin login details:

    Username: 		        admin	
    Email Address: 			<admin email address>
    Password: 		        <admin password>

6. Click on the Complete button to finalize the installation.

You will see a bright green page with the message Install complete!.

To access the admin section simply click on the Visit your admin panel button and enter your username and password. If you aren't redirected to the admin login page, you can enter the admin address manually:

http://YOUR_VULTR_IP_ADDRESS/admin/panel

For security reasons, make sure you delete the /install/ directory from the webroot directory:

sudo rm -rf ./install/

You are now ready to start adding your content and configuring the look and feel of your site. Make sure you check out the Anchor CMS documentation for more information about how to build and configure your site.