How to Install Overleaf Community Edition on Ubuntu 20.04 LTS

Updated on March 23, 2022
How to Install Overleaf Community Edition on Ubuntu 20.04 LTS header image


Overleaf is an open-source online LaTeX editor. With the help of Overleaf, students and academics can work together on a single LaTeX document to produce high-quality output.

This article walks through installing Overleaf Community Edition on a Vultr Ubuntu 20.04 LTS server instance.


  • A fresh Vultr Ubuntu 20.04 LTS server instance with at least 2 CPU cores and 4GB of memory, suitable for about ten concurrent users. If you need to serve more users, add 1 CPU core and 1 GB of memory for every five more concurrent users. Assuming the server instance's IPv4 address is
  • A domain name for accessing the Overleaf LaTeX editor site.

1. Setup DNS Records

If you are hosting on Vultr, set up DNS records as follows to point and to the IPv4 address of your server instance ( in the DNS tab of the Vultr control panel:

Entry #1

  • Type: A
  • Name: [blank]
  • Data:
  • TTL (seconds): 300
  • Priority:

Entry #2

  • Type: A
  • Name: www
  • Data:
  • TTL (seconds): 300

Entry #3

  • Type: MX
  • Name: [blank]
  • Data:
  • TTL (seconds): 300
  • Priority: 10

Entry #4

  • Type: NS
  • Name: [blank]
  • Data:
  • TTL (seconds): 300

Entry #5

  • Type: NS
  • Name: [blank]
  • Data:
  • TTL (seconds): 300

If you are hosting on other platforms, instructions on setting up DNS records may vary.

Learn more about managing DNS through Vultr in an article on Vultr DNS.

2. Harden the System

Use an SSH terminal to log in to the server instance as root, and then follow the instructions listed in this section to harden the system.

Determine if any swap file or swap partition exists in the system:

# swapon -s

If so, feel free to move on. If not, set up a swap file of 2GB to smooth the operation of the system:

# fallocate -l 2g /swap
# chmod 0600 /swap
# mkswap /swap
# swapon /swap
# echo '/swap    none swap defaults 0 0' | tee -a /etc/fstab
# free -m

Change the preset password of root to a new, strong, and private password (Say it is r00tyHvM%2ka$8E3):

# echo 'root:r00tyHvM%2ka$8E3' | chpasswd && history -d -1

Create a normal user named overleaf with sudo privileges, and then set up a strong password for the sudo user. Say the password is sud04QeXbcx#6&Cw:

# useradd -ms /bin/bash overleaf
# echo 'overleaf:sud04QeXbcx#6&Cw' | chpasswd && history -d -1
# echo 'overleaf    ALL=(ALL)   NOPASSWD: ALL' | tee -a /etc/sudoers.d/designated
# chmod 0440 /etc/sudoers.d/designated

Setup UFW firewall rules, allowing only traffic on SSH (22), HTTP (80), and HTTPS (443) ports:

# ufw default deny
# ufw allow 22
# ufw allow 80
# ufw allow 443
# ufw enable
Command may disrupt existing ssh connections. Proceed with operation (y|n)? y:key_enter:
# ufw status verbose

Update the system and then reboot the machine:

# apt update
# apt upgrade -y
# apt autoremove -y
# shutdown -r now

After the server instance gets up and running again, log in as the sudo user overleaf to move on.

3. Install Docker Engine

Uninstall any earlier versions of Docker in the system, if they exist:

$ sudo apt remove docker docker-engine containerd runc

It's OK to see the system prompts E: Unable to locate package docker-engine.

Install dependencies for setting up the Docker Engine Advanced Packaging Tool (APT) repository:

$ sudo apt update
$ sudo apt install ca-certificates curl gnupg lsb-release -y

Get the official Docker GPG key:

$ curl -fsSL | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg

Setup the APT repository for the stable release of Docker Engine:

$ echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

Install Docker Engine and containerd:

$ sudo apt update
$ sudo apt install docker-ce docker-ce-cli -y

To control Docker Engine as a non-root user, add the current normal user overleaf to the docker group:

$ sudo usermod -aG docker $USER
$ newgrp docker

Configure Docker Engine to enable automatic log rotation, restricting disk space usage of the Docker Engine log files:

$ sudo nano /etc/docker/daemon.json

Populate the file with:

    "log-driver": "json-file",
        "log-opts": {
            "max-size": "10m",
            "max-file": "3"

Press Ctrl+O, Enter, and Ctrl+X to save the file and quit.

Start the Docker service and configure it to start on boot:

$ sudo systemctl start docker.service
$ sudo systemctl enable docker.service

Start the containerd service and configure it to start on boot, too:

$ sudo systemctl start containerd.service
$ sudo systemctl enable containerd.service

Verify the installation of Docker Engine:

$ docker --version
Docker version 20.10.12, build e91ed57

To test the functionality of Docker, Use Docker to run a "hello world" image:

$ docker run hello-world
Hello from Docker!

4. Install Docker Compose V1.x

As required by Overleaf, install the latest stable release of Docker Compose V1.x as follows:

$ sudo curl -L "$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
$ sudo chmod a+x /usr/local/bin/docker-compose
$ sudo ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose

Optionally, install Docker Compose command completion for Bash:

$ sudo curl -L -o /etc/bash_completion.d/docker-compose

Confirm the installation of Docker Compose v1.x:

$ docker-compose --version
docker-compose version 1.29.2, build 5becea4c

Note: The above instructions are only for installing Docker Compose 1.29.2. Be sure to find out if a newer version of Docker Compose is available on the official Docker Compose installation page.

5. Install and Configure Overleaf

The officially recommended tool for installing Overleaf is the Overleaf Toolkit which consists of a series of scripts wrapping around the Docker Compose program.

Use git to download Overleaf Toolkit:

$ cd /opt
$ sudo apt install git -y
$ sudo git clone ./overleaf
$ sudo chown -R overleaf:overleaf /opt/overleaf

Initialize Overleaf local environment with the --tls flag to enable Transport Layer Security (TLS):

$ cd /opt/overleaf
$ bin/init --tls

Running the above script generates a self-signed TLS certificate in /opt/overleaf/config/nginx/certs/overleaf_certificate.pem and the paired private key in /opt/overleaf/config/nginx/certs/overleaf_key.pem. Replace them with your own ones if necessary, but be sure to keep the same file names and the same permissions on them.

Set environment variables for running Overleaf Community Edition behind the Nginx TLS proxy:

$ nano /opt/overleaf/config/variables.env

Find the two lines listed below:


Uncomment them:


Optionally, edit lines listed below to customize the interface of your Overleaf site:

SHARELATEX_APP_NAME=Our Overleaf Instance

# SHARELATEX_NAV_TITLE=Our Overleaf Instance

# SHARELATEX_LEFT_FOOTER=[{"text":"Powered by Overleaf © 2021", "url": ""}, {"text": "Contact your support team", "url": ""} ]
# SHARELATEX_RIGHT_FOOTER=[{"text":"Hello I am on the Right"}]

Example modifications:



SHARELATEX_LEFT_FOOTER=[{"text":"Powered by Overleaf", "url": ""}, {"text": "Contact us", "url": ""} ]
SHARELATEX_RIGHT_FOOTER=[{"text":"©2022 EXAMPLE.COM. All rights reserved."}]

Press Ctrl+O, Enter, and Ctrl+X to save the file and quit.

Note: This article omits instructions on how to update SMTP-related settings stored in the same file, because Vultr blocks the SMTP port 25 on each server instance by default according to its anti-spam policy. Contact Vultr customer service to remove the restriction if you do need to enable SMTP email sending on your server instance.

Edit Nginx-related settings in another Overleaf configuration file:

$ nano /opt/overleaf/config/overleaf.rc

Find the lines listed below:


Replace them with:


Press Ctrl+O, Enter, and Ctrl+X to save the file and quit.

Run all the Overleaf Docker services in background:

$ cd /opt/overleaf
$ bin/up -d
Creating mongo ... done
Creating redis ... done
Creating sharelatex ... done
Creating nginx      ... done

After all Docker services are up and running, point your favorite web browser to to register the first administrator account.

When using a self-signed certificate, your web browser, such as Chrome, will warn you that your connection is not private. Feel free to ignore the security alert. Click the Advanced button, and then the Proceed to (unsafe) link to visit the Overleaf registration page.

On the Overleaf registration page, input your email address and password, and then click the Register button to finish the registration of the first administrator. Click the Log in here link to go to the Log In page, and then use the administrator's credentials to log in.

6. Update TeX Live to a Complete Installation

By default, the Overleaf Docker image only includes a minimal installation of TeX Live to save bandwidth. Follow the instructions in this section to update TeX Live to a complete installation.

While Overleaf is running, use the commands below to start a shell inside the Overleaf container:

$ cd /opt/overleaf
$ bin/shell

The prompt will turn into something that looks like root@4945b4907b6f:/#.

Update the tlmgr program:

root@4945b4907b6f:/# tlmgr update --self

Optionally, find the URL of the nearest Comprehensive TEX Archive Network (CTAN) repository location from the site, such as, and then change the default repository location as follows:

root@4945b4907b6f:/# tlmgr option repository

Update TeX Live to a complete installation in the background, combining with the nohup command to prevent update failure caused by any accidental SSH disconnection:

root@4945b4907b6f:/# nohup tlmgr install scheme-full &

Downloading and installing all the TeX Live packages (more than 4,000 packages) may take a while. Use the command listed below to check for the progress at any time:

root@4945b4907b6f:/# tail nohup.out

Until you see the output ends at:

tlmgr: package log updated: /usr/local/texlive/2021/texmf-var/web2c/tlmgr.log
tlmgr: command log updated: /usr/local/texlive/2021/texmf-var/web2c/tlmgr-commands.log

Having all the TeX Live packages in place, update them to the latest versions:

root@4945b4907b6f:/# tlmgr update --self --all

Exit the shell inside the Overleaf container:

root@4945b4907b6f:/# exit

To make your changes to the Overleaf container persistent, use the command listed below to save the changes:

$ docker commit sharelatex sharelatex/sharelatex:with-texlive-full

Set up an overriding Docker Compose configuration file to reflect the changes:

$ nano /opt/overleaf/lib/docker-compose.override.yml

Populate the file with:

version: '2.2'
    image: sharelatex/sharelatex:with-texlive-full

Press Ctrl+O, Enter, and Ctrl+X to save the file and quit.


  1. The version number, which is 2.2 in this case, must be the same as the version number in other Docker Compose configuration files, such as /opt/overleaf/lib/docker-compose.base.yml.
  2. Do not use tabs for indents when dealing a .yml file. Use 2 or 4 spaces for 1 indent.

Finally, stop the running Docker services, delete the former ShareLaTeX container, and then restart the Overleaf Docker services:

$ cd /opt/overleaf
$ bin/stop && bin/docker-compose rm -f sharelatex && bin/up -d
Stopping nginx      ... done
Stopping sharelatex ... done
Stopping mongo      ... done
Stopping redis      ... done
Going to remove sharelatex
Removing sharelatex ... done
Starting redis ... done
Starting mongo ... done
Creating sharelatex ... done
Recreating nginx    ... done

Next Steps

Depending on the specific languages you plan to use, you must select the proper LaTeX compiling engine and fonts when typesetting your documents with Overleaf. To learn more about configuring Overleaf for typesetting documents in the languages you prefer, visit the Overleaf Documentation page.

More Information